DH-100 Vampire 700mm (30mm edf) LW-PLA

This scale replica of the De-Havilland Vampire is designed for quick and easy construction and printed using light weight PLA (LW-PLA). Designed to be powered by the QX-MOTOR(7000kv) 30mm edf unit or 2205 2300KV Outrunner in pusher configuration. Utilising 3 channel controls; aileron, elevator and throttle, this model performs extremely well given its small size and lightweight.  For best results the canopy should be printed with clear PLA. A pusher variant of the same size is currently in testing and will be attached to this file set when completed.

This model is recommended for pilots with skills from late beginner and up.

• Factory files for Simplify 3d
• STL files for all components
• G-code files for all parts
• Cura profiles for LW-PLA and regular PLA
• Detailed assembly manual and user guide
• Print settings guide for all parts
• part orientation images
  

X1 QX-MOTOR 30mm edf 7000kv(or similar) or 2205 2300kv outrunner
X1 20AMP ESC
X1 1000MAH 3S LIPO OR SIMILAR (min 25c)
X4 3.7G MICRO SERVO
X2 10mm X10mm X 2mm MAGNET (ROUND)
X6 MICRO HINGES (optional)
VELCRO

MINIMUM PRINT VOLUME:
200x200x200

For any questions and assistance please email us at:

aeroworks3d@outlook.com

NOTE: All STL files need to enlarged to 1000% if using a program other than simplify3d.