The browser you are using is not supported. Some critical security features are not available for your browser version.
We want you to have the best possible experience with rc3Dmarket. For this you'll need to use a supported browser and upgrade to the latest version.

Micro Gentle Lady


Inclusive All Taxes


This is a (1/2 scale) Micro Gentle Lady radio controlled sailplane. It can be printed with or without the power pod. It is printed with PLA and Color Fabb LW-PLA.

The power pod is and center wing wing sections and hatch are all regular PLA.

Each wing panel printed with LW-PLA has a 3mm carbon fiber rod. The wing panels are joined with 2mm carbon fiber rods.

The fuselage is printed in two parts with LW-PLA It is joined with 2mm carbon rod.

The vertical and horizontal stabilizers are printed with LW-PLA and have a 2mm carbon rod in the middle of them.

I printed this on a Artillery Sidewinder X1 v.4 printer. The files are for 300x300x400 printer.

I used zero percent infill.

Aircraft Specifications:

Wingspan: 36 inches / 914mm
Weight: 7.8 ozs / 914 grams
Center of Gravity: 45mm from inboard leading edge of the wing..

Motor: 1806 1400KV Brushless Motor
ESC; 12 amp esc / 2 amp BEC
Battery: 2s 300mah Li-polymer
Servos: 2 - K-power P0025 2.5G/0.8KG/0.07S/6V Coreless Plastic Analog Servos
Receiver: FrSky D4R-II - 4/8 Channel Receiver


Carbon Fiber Rod - 3mm and 2mm
1- Wing Bolt - M3 x 15mm Nylon Phillips Cross Pan Head Machine Screw
2 - 5 x 3mm Multi-use Refrigerator Magnets
1 - K & S PRECISION METALS 497 0.039" x 36" Music - pushrods
Lead added to the nose for ballast weight.

Here is the link to the thread on RC Groups:



Rating & Reviews


Based on 0 Ratings

  • 5 Star
  • 4 Star
  • 3 Star
  • 2 Star
  • 1 Star