R/C SU-57 FELON

<< THIS MODEL>>
- This model is precise scale down R/C version of SU-57, with the airfoil altered to suit flight in R/C scale.
- Like the actual aircraft, it used two EDFs and is equipped with flaps and retractable landing gear.
- The elevator and rudder operate in a full-flying manner, and the control linkage is designed to be invisible from the outside.
- The active strake(LEVCON), a unique part of the SU-57, were designed to operate in a realistic manner.
- This model mainly uses LW-PLA and is printed as a 1-wall outer shell and 3~4% internal infill method.

<< PRECAUTION>>

THIS IS CONSIST OF MANY PARTS. THEY MUST BE PRECISELY ASSEMBLED AND PROPERLY SET. IT IS RECOMMENDED THAT YOU HAVE EXPERIENCE IN SETTING UP AND FLYING A TYPICAL FOAM OR OTHER AIRFRAMES. THEREFORE, THIS IS NOT RECOMMENDED FOR BEGINNERS.

THIS IS A MODEL AIRPLANE FOR R/C PURPOSE MADE BY A SPECIAL METHOD CALLED 3D-PRINT. THIS IS DIFFERENT FROM A GENERIC FOAM PRODUCT OF WELL-KNOWN COMPANIES ON THE MARKET AND, IS NOT MEANT TO REPLACE THEM.

IT IS IMPORTANT TO UNDERSTAND THAT ITS FEATURE, PERFORMANCE AND HANDLING MAY DIFFER.

< Specification >
- Wingspan : 1,080mm
- Length : 1,500mm
- AUW : Around 4kg(ready to fly, including 900g battery)
- Power system : Twin 6S 7mm EDF / 80A ESCs

Not for beginners!!
This model mainly uses LW-PLA filament. You should be familiar with its use.
Additionally, this model consists of a large number of parts and must be printed exactly as specified in the parameters.
If you are confident in your patience and craftsmanship, go for it.