This replica of the Dornier Do-335 Pfiel is designed for quick and easy construction and printed using Colourfabb light-weight PLA (LW-PLA). For best results the canopy should be printed with clear PLA and the motor mounts and propeller assembly in regular PLA. A scale propeller is included and is designed to suit both the 1806 and 2804 2300kv outrunner motors with a range of propeller blades varying in size and pitch to choose from in 3 blade configuration. Utilizing 3 channel controls; aileron, elevator and throttle, this model performs extremely well given its small size and lightweight. Capable of scale and aerobatic flight, this model is
filled with scale detail;
- Clear canopy with window outlines (single and two seat variant included)
- Intakes and exhausts
- 3 bladed propellers with scale hubs
- removable lower fin (magnetically attached) designed to pop off on landing to protect the lower fin but still maintain scale look in the air.
This model is recommended for the pilots with beginner level skills.
Included with this file:
LENGTH 730mm (28.7 in)
PRINT WEIGHT 250g (8.9oz)
FLYING WEIGHT 450g (16oz)
CHANNELS 3 (aileron, elevator, throttle)
NOTE: All STL files need to enlarged to 1000% if using a program other than simplify3d.
Based on 0 Ratings